“数字电子技术”课程思政教学改革研究

落实立德树人,实现三全育人,将思政融入到《数字电子技术》这门专业课程中,培养学生专业知识的同时,引导学生树立良好的人生观和价值观。通过重构本校的数字电子技术课程内容,挖掘思政元素,并润物细无声般融入到数字电子技术的教学改革中,并通过实际的案例讲解具体融入过程。     

多维度教学策略在信号与系统中探究

在新工科背景下，围绕以学生为中心，本文提出了一种多维度线上线下混合式教学策略在“信号与系统”课程中的探究与实践。整体流程主要包括课前自主学习、课上知识消化及课后教学反馈。该策略通过多个维度的教学方法对“信号与系统”课程中的知识点进行展示，显示了此教学策略能够达到良好的教学效果，且本文提出的教学方法也具有良好的推广作用。     

"电磁场与电磁波"课程混合教学模式研究

“电磁场与电磁波”是多种学科的交叉点，是电子信息、通信技术相关专业的重要理论基础，是电类专业的一门核心基础课程。该课程内容涉及面广、理论抽象、数学分析多，是公认的一门教师难教、学生难学的课程。本文针对“电磁场与电磁波”课程教学实际，尝试利用前沿技术引领课堂教学，对教学模式进行改革与实践。以课程为中心、教师为主导、学生为主体，探索覆盖体系课程融合、课外仿真实践、课程思政、工程案例与科研融入、翻转课堂、线上线下并行等混合教学模式。通过教学模式改革，希望打通课前、课中、课后以及相关课程间的连接通道，帮助学生系统理解和消化电磁场与电磁波的基本理论，充分锻炼学生独立解决实际问题和实践创新的能力。     

Techno-economic assessment of hydrogen refueling station: A case study in Croatia

Hydrogen refueling station (HRS) capacity and location depend on the users, which makes it difficult to select the most favorable option before potential users are actually identified. As in Croatia, at least for now, there are no hydrogen users, this study considers a wide range of HRS capacities and their different configurations. These include hydrogen production and charging station within one existing wind farm in Croatia or both nearby the users, the hydrogen production within the wind farm and the charging station nearby the users, while hydrogen is delivered to the station with a tube trailer, and configuration of hydrogen production within the wind farm with a mobile charging station in case of several users in different locations. Each HRS configuration is evaluated by the obtained levelized cost of hydrogen depending on the capital, and operation and maintenance costs within the HRS techno-economic analysis provided.     

Coastal trapped waves in the southern Caspian Sea

Previous studies reported coastal trapped waves (CTWs) in the Caspian Sea (CS). This study deals with the generation mechanisms, the temporal and spatial variability of CTWs in this area, and their transformations during propagation from the origin to the destination using recent measurements and high-resolution numerical simulations. CTWs are observed at all stations with periods of 2–6 days after northerly storms. The Absheron Peninsula, old Sefidrud delta, and Nur coasts were identified as the CTWs prone regions. The generation of CTWs in these locations was confirmed using numerical experiments. The propagation away from the generating location of CTWs was analyzed using a representative real wind storm. In the west part of the CS, the generation mechanism of CTWs is mainly similar to the barotropic Kelvin waves; in contrast, it is similar to the continental shelf waves in the southern shelves. The results can be used to study the contribution of generated CTWs to the transport of sediment and biological materials in all large lakes.     

高密度超多芯连接器组装工艺研究

为了适应电子产品小型化和高密度集成要求,高密度超多芯连接器被广泛使用。由于其引线数量多、间距小、焊接间隙微小等原因,传统手工焊接方法很难满足其焊接质量要求。对高密度超多芯连接器组装方法进行了研究。通过焊接工艺优化,成功实现了焊接间隙0.08 mm的LRMS系列连接器可靠焊接,一次组装合格率达到98%以上。     

3-D Elasticity Solutions of Layered Rectangular Plates Subjected to Thermo-Loads

According to the exact three-dimensional (3D) thermoelasticity theory, the elasticity solution of the simply-supported layered rectangular plates subjected to steady temperature loads was studied. An analytical method was developed to solve the temperature, stress and displacement fields in the plate. Firstly, the general solutions of the temperature, displacements and stresses in a simply-supported isotropic layer were obtained by solving the 3-D heat conduction equation and the 3-D equations of elasticity respectively, which were expressed in the form of double Fourier series. Then, the temperature, displacement and stress relationships between the upper surface and the lower surface of the isotropic layer were derived. Based on the continuity of the temperature, the heat flux, the displacements and the stresses on the interface of two adjacent layers with different material properties, the recursive formulae of temperature, displacements and stresses between the bottom layer and the top layer of the layered plate were obtained by using the transfer matrix method. The unknown coefficients in the solutions for every layer were uniquely determined by the upper surface and lower surface conditions of the plate. The distributions of the temperature, displacements and stresses in the plate were given by substituting the unknown coefficients obtained back to the recurrence formulae and the solutions. The convergence of the solutions was checked with respect to the number of the terms of series. Comparing the results with those obtained from the finite element method, the correctness of the present method was verified. Finally, the effects of surface temperatures, plate thickness, layer number and material properties of each layer on the distributions of the temperature, displacements and stresses in the plates were discussed in detail.     

浅议新元矿井建井期间安全高效通风技术

新元矿井建井期间采用了安装在中央进、回风井井筒四趟玻璃钢风管作为假回风,实现了矿井建设期间的全负压通风系统,通风能力从可满足原来地面通风四个掘进头增加到15个掘进头生产,并保证了矿井安全。     

Influence of branching regularity on the behavior of hyperbranched polymers in solution

A carbosilane pseudo‐dendrimer with irregular structure and degree of branching DB = 1 was synthesized and fractionated. The molar masses of the obtained fractions ranged from 5000 to 490 000 g mol^?1. The hydrodynamic and conformational properties were studied by the methods of light scattering, sedimentation‐diffusion analysis and viscometry in dilute hexane and toluene solutions. The Mark ? Kuhn ? Houwink dependences were obtained. The results for the pseudo‐dendrimer are compared with the data for the initial hyperbranched poly(diallylcarbosilane) with DB = 0.5 and carbosilane dendrimer. It is shown that the solution properties of the pseudo‐dendrimer are close to those for the irregular hyperbranched polymer and differ significantly from the dendrimer behavior. Hence, it is branching regularity rather than the degree of branching that determines the conformational and hydrodynamic properties of hyperbranched polymers with a high degree of branching DB ≥ 0.5. © 2014 Society of Chemical Industry